Description

4-Scene with Raise/Lower and 450W/450VA neutral-wire dimmer (Incandescent/Halogen/Magnetic Low Voltage) or 100W (approved CFL/LED), 120V. Functions as a dimmer and keypad combined into a single device. Neutral-wire controls that can be used with small loads, such as screw-in CFL/LED lamps. Normal keypad operations will be available if the attached load is not installed or if the lamp is burned out. Can be controlled as part of a lighting control system and incorporates advanced features such as fade on/fade off and rapid full on. Easy-to-use buttons, plus a unique backlit engraving option that makes them readable any time of the day or night. Buttons are rounded, allowing engraving to be displayed at an upward angle, increasing readability. Front accessible service switch for safe lamp replacement. Wallplate sold separately.

RadioRA 2 seeTouch LED+ Hybrid Keypads function as a dimmer and keypad combined into a single device – great for clients’ retro-fit applications. Install in either single-pole or multi-location applications (with Remote Dimmer; sold separately) for loads up to 100W LED or 450W Incandescent/Halogen/MLV; Neutral Required. Normal keypad operation is available even if the attached load is not installed or the lamp is burned out. RA 2 Hybrid Keypads utilize Lutron’s Clear Connect -Type A Technology and can be used in RadioRA 2 or new RadioRA 3 systems (Required Main Repeater/Processor sold separately). One pre-paid custom engraved button kit included through Lutron. Coordinating Claro wall plate sold separately.
Maximum Rating: 100W LED, 450W Incandescent/Halogen, 450VA MLV
Features Lutron’s Clear Connect- Type A Radio Frequency; Must be located within 30 ft (9 m) of a processor or repeater for RF
Require 120V and have screw terminal connections; Neutral required
The RA 2 LED+ Hybrid keypad can be used in single pole or with up to 9 companion dimmers for multi-location applications; Companion Dimmer (RD-RD-xx) sold separately
Interchangeable button kits allow the keypad to be changed to a variety of finishes, colors, button configurations, and personalized markings even after installation
Program schedules, preset light and shade levels on individual buttons, configure raise/lower buttons, and adjust backlight brightness through Lutron Designer software
RA2 LED+ Hybrid Keypads include one redeemable credit for a single custom personalized engraved button kit through Lutron
RA 2 LED+ Hybrid Keypads and coordinating Claro wall plates are available in 10+ colors (wall plate sold separately)
Backwards Compatible; RadioRA 2 and RadioRA 2 Select systems can be upgraded to RadioRA 3 (some device limitations apply) and RadioRA 2 project files can be converted with one click
Works without Wifi; Local device operation will continue to function if internet connection is lost

Additional information